[Cdnone1]

I am still trying to find to ground short/fault.
I have chased it back to the power supply of the fuse panel.
The red/black wire from the 5 pin connector going to the ignition switch was showing a ground fault. I chased it back to where it enters the top of the fuse panel on fuse #12.
Everything is disconnected and the fuse is out.
I removed the red/black wire from the fuse block and the ground fault/ continuity went away
When I put the continuity meter on the top of the fuse holder on fuse 12 and ground I get a tone meaning a ground fault.

Are the top of the fuse mounts grounded?
Are they connected to each other?

The only way I could have a continuity between the top of fuse block 12 and ground is if they where connected or grounded somewhere.
Thanks