Quote:
Originally Posted by rads
I been loaned a pair of ITG filters for my 72T, on a sale or return basis. Been looking through the posts about the breather hook up etc but can not find any information about where (and if) I should connect the charcoal canister.
So how have you guys done it?
|
If it's a loaner, does that include the hole you may create for the breather as well?
One option is to drill a hole in the baseplate (it's aluminum), then use a grommet, hose connector and hose for PCV systems; sourced from your LAPS. May need an adapter to connect the different hose dimensions.
To avoid burping oil into the intake, I suggest you install a breather tank to vent crankcase>oil tank blowby pressure, then connect a hose from the breather tank to each ITG baseplate. The fuel tank breather hose could be routed directly to the breather tank as well.
Sherwood