Got this one in a few months ago and my son has had his eye on it since the day I got it. So with his help, it is finally done. Should be a good ride for him, (he is 21, and a great kid, who works hard for what he has!) at least until the first time he has to put fuel in it! When I first got the truck it had a hole in the side of the block where the connecting rod was coming thru the hole! So out with the old and in with the new. A low hour motor we had in stock went in, after we turned up the fuel pump, so now it is putting out about 125 HP. Also we changed over the shift plate in the transmission, so now it has an 8 speed instead of the 6 speed. Also we replaced the brake lines, turned the rotors, and new pads in all 6 calipers. Plus a new gear reduction starter, clutch, slave cyl. and basically what ever it needed. Next we had to replace the whole bed, as the one on the truck was rusted right out. So we rebuilt one we had in stock. So hope to put it on the road on Monday or Tuesday. Should make quite the scene when we show up at the local cruse night with two Unimogs.
