View Single Post
timc timc is offline
Registered User
 
Join Date: Oct 2006
Location: Chas, SC
Posts: 1,045
Got it installed this past Saturday. A930ROCKET (Jim Bell) came by and helped. So I have deleted the AAV/AAR, and the Decel valve. No major noticeable drop in RPM's when off the gas (due to removing the decel), but a good bit more crackle and pop. Most likely will hook it back up just to vent a little more boost when off the gas just to see what that does.

Seems like it has a bit more grunt at lower RPM's but that is subjective at this point as I have no dyno numbers before and after. I also need to fabricate a shroud to force all the air through the IC, as I know I am loosing a lot of airflow across the IC due to the large gaps around the IC due to no shroud.

So I've got a bit more playing around to do with the shroud fabrication and the various decel valve configurations. I know I will NOT be reinstalling the AAV/AAR.

Thanks again COLE.
__________________
Tim
1986 930
Gone:71,2,4 914's, 70T, 71T(RS),77S
Old 08-21-2011, 06:06 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)