Quote:
|
I did misspeak when I said "debounce". Technically what I am looking at is a snubber. I'm only needing to protect the darlingtons from the coil and then protect the OR gates feeding the darlingtons.
|
So you just need something to prevent spurious noise on the supply rail (like stuff generated by the coil that could talk back into supply line) from bleeding over to the Darlingtons that are (I assume) driving the load. It's an issue of PSRR (power supply rejection ratio) then. Understood. It's a little bit different ball of wax but I could easily help you there as well.