Quote:
Originally Posted by djb25
Ok, I checked the sensor plate and I feel resistance. No free play.
I don't know what to tell you guys about the cold pressure. I looked into it before opening up the WUR and I found a thread about it. Basically the WUR was not regulating at all, all fuel was flowing through?
I also already checked the cold start valve. Checked for voltage and the related.
Maybe I should swap out the plugs and see if that helps...
|
One thing I noticed as I re-read your original post is that you checked the spark at the coil but, apparently, not at the plugs. Probably insignificant but since your fuel delivery issues seem to be okay, I think a change out of the plugs is in order as you do get a "sputter" but not full ignition.
Don't forget you still have a residual pressure issue and a likely air leak problem as well. After changing the plugs, be sure the system is pressurized and give it a try.