|
Metal Guru
Join Date: May 2001
Location: Beverly Hills, Michigan
Posts: 2,526
|
Use liberal amounts of PB Blaster on such components like the wedge bolt, ball joint shaft to strut housing and the ball joint retaining nut.
Still, with all that I had to cut one retaining nut with the Dremel.
I was told by Steve Weiner that ball joints don't usually wear out but if the rubber boot is breached then water ingress will destroy them. Check yours and you may possibly save $100.
__________________
Paul B.
'91 964 3.3 Turbo
Port matched, SC cams, K27/K29 turbo, Roush Performance custom headers w/Tial MV-S dual wastegates, Rarlyl8 muffler, LWFW, GT2 clutch & PP, BL wur, factory RS shifter, RS mounts, FVD timing mod, Big Reds, H&R Coilovers, ESB spring plates- 210 lb
|