[BoiseShark]

The filter assembly is removed, but I am beginning to suspect the gasket on the lower intake plenum as well.

I have decided to make a good video of it running its course and also all the vacuum lines and where they go to currently.

I hope to make it a good enough video that you guys might be able to get an idea of what is going on. I will also show control and system pressures.

Last time it ran is after I cut the rod down in the WUR and i noticed the warm control pressure was actually lower now than it should be...woops...but car actually ran longer and then had the same symptoms as if control was still too high.

I'll just make a video of everything i have done so far and we'll go from there.