[BlueWing]

I was thinking if a local Pelicanite has a recommendation for a shop that will do the job right I would go that route. Just thinking local and knowledgeable with our stuff.
I can mail any of the two parts out as I have the luxury of time right now.

I know the flywheel needs to be resurfaced on a grinder as opposed to a lathe and the pressure plate seat squarely ground to the same plane. So figuring I'm in Race City USA someone local to N.C. would chime in.

The injectors should be a smaller issue for service.

Just like to use local and recommended to support our Porsche community.

Terry