[Hugh R]

The pin at the pedal is not what you might read in 101 Projects, you don't pound it out, you catch the back of the clip just south of where the cable meets the pedal with the tip of a screwdriver, and you lift it up off of the cable and then pull it out from left to right. Make sure the Omega spring is up against the heat exchanger, you can be in two positions. If not, use a screwdriver to push it back up against the H.E.

This item here, its rotated 90 degrees but you get the idea. http://www.pelicanparts.com/cgi-bin/smart/more_info.cgi?pn=999-166-001-02-M260&catalog_description=Snap%20Retainer%20Clip%20%2F%2 0Pin%20For%20Clevis%20Fork%20%28clutch%20cable%20t o%20pedal%20shaft%29%2C%20911%2F912E%20%281974-86%29%2C%20911%20Turbo%20%281976-88%29