Quote:
Originally Posted by jsoderbe
Do you have the 12V terminal on the starter under control? Meaning, both plus cables connected, and the rubber glove secured over it to avoid a short? Is the 12v cable from the battery squeezed between something on its way out of the tunnel, maybe the trans mount?
Make sure you unplug the control box while you are working on this problem, you dont want to fry that one....
Regards,
Jhan
|
I pulled both the positive and negative wires off the battery while I try to sort out this problem...certainly don't want to burn anything. Both starter wires are mounted tightly on their post and the rubber boot os covering them - neither appear to be in contact with anything except one another. I'll check the battery cable, but I didn't remove the transmission - only the engine.
Thanks for the ideas.