Quote:
Originally Posted by Deschodt
Yes on all of the above. Thanks... I will move the long cable to another port first, and retest. I have a new 100Ft cable which I will also test (still coiled) on location before I even try to snake it there ;-) I have a switch on order - that part I suspected so I'm not worried.
I'm still slightly baffled by the long-cable-only 50% loss (total loss from a kink I would understand, but 50%?) - that's before the hub - and by the N router's crappy output vs a b/g, but I will re-update firmware and see.... Thanks guys, good enough for starters...
I spent 1 hour last night spelling my name to tech support in India before they'd reset on their end, then an hour running around the house with a laptop running speedtests at the end of every wire ;-) By God I'll get my 20/5 !
|
I assume you have never done any custom configuration on your router.
Open a web browser and put in 192.168.1.1, that will take you to the routers admin login panel.
User: admin
Pass is: password or password1
If those passwords don't work then reset the router, on the back use a ball point pen and push the reset button for 10 or 20 seconds.
Make sure to assign a different password unique to you.