|
Disconnect the bar temporarily so you can remove the rubber bushing on the cracked mount (you don't want to melt it from weld heat)
Weld up the crack. Next fashion a small strap from 1/8" x 1" wide that will be welded between the flange edge with the threaded nuts on it and the main body center of the sway bar bracket. Paint it, and reassemble.
Suggest you do the same to the other side and you are set to go
__________________
1970 914-6 street"evil cockaroach"
1970 911 Targa "ST"
Jade Green IROC Tribute (ready to race)
|