|
if your talking about your body side moldings ?
there is no glue or screws ,
on the later cars just one rivets on the door edge and dubble sided tape .
on the early cars no rivets and just dubble side tape .
if you have a rivet drill off the head and then with a eraser wheel remove the dubble sided tape . with luck if you use a heat gun and heat up the molding as you remove it the dubble sided tape will stay on the molding .
the thing to check for is that the car still has it's original finish . if the car had any of it's panels repainted and they did not remove the moldings to paint then there will be a out line of the molding when you remove it .
|