|
Registered
Join Date: Dec 2012
Location: Motor City area
Posts: 617
|
I have been looking at the "collar" part that would be attached to the chain tensioners.
It says in the catalogue that the "collar" is not to be used for pressure fed tensioners. What is installed (pictured above) is the hydraulic assisted tensioners; meaning that I cannot add the collar to this system. With that said, my plan is to use the leveling technique outlined in the 101 projects book for the tensioner covers (hit the cover surface with sand paper with the glass method) and move forward with the re-installation of the covers.
Am I missing something here? Is the collar system only for the non-hydraulic/spring only chain tensioner system?
__________________
'The forever project car - 1979 911SC targa - getting it running right was a task, read about it here: http://forums.pelicanparts.com/911-engine-rebuilding-forum/722362-dads-911sc-i-am-finishing-rebuild-long.html
Other cars: 1993 Corvette LT-4/ZF6, polo green. 22 Ranger 4x4 with a couple cool things.
|