Lars
The fender tank is secured by a steel strap that attaches to a couple of shorter straps that should be tacked to the headlight bucket.
The lower hose clamps to the small tube protruding from the inner fender bulkhead. The small upper hose goes through the grommet which appears to be still present in your inner panel just above the tube. From there it continues to the small hose fitting on the charcoal cannister. In the attached picture, I'm not using a cannister, so my small hose is vented externally and I've since plugged the hole.
The black box attaches under the cowling just inside of the left hood hinge. It is held in place (originally) by a black square cross section rubber band. The attachment points look like two inverted longhorn cattle horns mounted fore and aft of the box location on the underside of the cowling. The bubber band goes around the rear cattle horns, between the box outlets and around the front cattle horns. The box outlets go toward the front of the car. I'm pretty sure the black rubber bands are nla, and I don't know of anyone making repros. Look around your shop. You may already have one. It took me a while to realize what it was when I did my re-assembly. Unfortunately, I don't have a picture of the black box attachment.
