|
I've got a 1999 323i UK car. This is the closest I've come to a possible solution but the symptoms are slightly different. I get no heat from the start, temp fine on the needle, no over heating. I get a gentle 'breeze' of cold air. However, if I whack the temp right to 32 degrees, the hot air pumps through. 31.5 and it's still cold. knock the temp down and it's fine for a while, maybe 5/10/15 mins but returns to cold. I did have overheating a couple of years ago which was fixed with a new rad cap and have since replaced the whole rad, it didn't blow a head gasket and has only ever had this heater issue since. I'm 100% sure it's bled through.
__________________
This post was auto-generated based upon a question asked on our tech article page here:
|