|
non-whiner
Join Date: Aug 2012
Location: Slightly right of center
Posts: 5,235
|
I followed Jeremy's approach and used an Earls cooler with AN-16 fittings. Chuck at Elephant provided the metric to AN adapters. I also installed a front valance Earls cooler in series. Both together were around $500. Typically, the biggest challenge with aftermarket is the size of the fittings. Most are either -10 (too small) or -12 (marginal imo). The Earls coolers are -16 which provides great flow.
__________________
"Too much is just enough."
|