|
Registered
Join Date: Dec 1969
Location: Monterey, CA, USA
Posts: 214
|
I removed and tested the starter:
Negative battery post to starter body and mounting bolt, touched trigger on solenoid with the cable from the positive battery post. - Failed? the gear on the starter motor moved a little but didn't pop out. It moved about 1 or 2 mm, enough to take up the wiggle room in the gear shaft.
Positive battery post to positive solenoid post, negative battery post to starter body and mounting bolt. Bridged positive solenoid post to solenoid trigger - Failed
This is a brand new FLAPS starter with less than 10 starts on it.
Last edited by frank; 02-05-2014 at 03:47 PM..
|