I am finally getting around to removing my Ungo Box from my 1986 Carrera. The model I have is the TL-4000. It hasn't really been a problem, but it doesn't work either. For that reason, I want it to go bye bye.
I have made some good progress. I have removed the brains, and fished 2 of the minor harnesses out. The main harness is a bit more "entrenched", and I have a few questions about it.
1) One wire heads up into the hood and connects to the trunk light. I figure it should be easy to remove it without affecting too much. My question is, would this be supplying power to it?
2) There are a few wires that come off the main harness, with one going down into the smuggler's box. The first 2 pics I have show the main harness and the wire going down into the box. What is it probably connected to down there? How do I get to it?
3) The rest of the harness heads over to the fuse box. I found one wire (red/white) dangling with a fuse connected to it. Maybe PO disconnected? He seemed to think it was still operational as he told me how to shut if off. I don't see the other end where the fuse would plug in. I feel like I should remove it, if I can find it. There are 2 other wires connected to fuses. Can I just remove them or might there be something that I need to replace? See the pic below for fuse locations.
Thanks in advance for any help you can provide!
Also, if anyone is interested in the remains, I am trying to remove it intact. The fob sensor stuck to the window might be difficult, but I'm going to try.