[HawgRyder]

To feed chains through a case where the sprocket is deep inside (like on motorcycles) I use a piece of shirt cardboard or similar.
I feed the cardboard into the dark (LOL) and let it wrap around the sprocket so that the width of the cardboard is enough to cover the teeth...then feed the chain in (on top of the cardboard) until it wraps around the sprocket...them remove the cardboard and let the chain sit on the sprocket.
Doing it this way...you don;t have to "shuck" the individual links around the sprocket.
Make sure the master link clip is set with the closed end facing the direction of chain travel.
Have fun.
Bob