[pingflood]

Thought I needed to replace a tail light bulb. However, after replacement it still didn't work. Tried the bulb with a 12V connection and it is fine.

Took apart the connector to the tail light and I get nothing. If I turn on the turn signal I get signal on one of the connections. The lights appear to work except for this one bulb. It is the running light, i.e. the one that should be on whenever the headlight's on. Works fine on the driver side. The wiring looks pretty healthy (no dried, cracked wires) so not sure where to begin troubleshooting this.

Any suggestions?

This is a 1983 Euro 928S. I need the light to work to pass inspection for the year, so tempted to just pull a wire from the left running light to the right one, but would like to try to fix it properly first...