Quote:
Originally Posted by wswartzwel
X3 it won't let the throttle close all the way on that side. You have to look close where the cable fits into the adjuster.
|
Well one of the variables in this is that I did replace the throttle cable because I broke one of my vario bar risers and I replaced it with a 70mm versus the 60mm that was on there.
So I did the upgrade on the newer longer cable.
But the cables are both seated into the hole by the throttle bodies. When I pull the throttle they both appear to pull the throttle bodies equally. I had planned syncing them once I got it running. But could those things being just a tad out of sink cause one cylinder to not properly fire