|
Registered
Join Date: Feb 2001
Location: Buzzards Bay, Ma, USA
Posts: 620
|
You need to back up a little. The DME will not tell the coil to fire unless you have tach bounce. You will not get tach bounce unless the ref and speed sensors are good and the dme relay is good. There is a procedure to test the sensors at Clark's Garage and if you install the jumper for the relay you can eliminate all these as the source of your problem.
Take a minute and do a search of this forum. There are many threads with lots of useful information on this subject. It is a common problem.
Keep updating us on this thread. There are many very talented owners here who are very willing to help.
Jon
__________________
87 924S
82 924-Gone.
80 924 parts car-Gone.
|