[R_Builder]

Mechanicals have gone well save one snag on the front oil cooler stuff. Put that on the back burner and focusing on the top side engine bay electrical. I did so much prior to engine install, have done a bunch more now that the motor is in, and STILL have a bunch to go ! Don't take this EFI thing lightly if you jump off the bridge... it is a lot of work. Gotta be patient!

Pretty hard to tell by the pictures, but I am down to the cam sync sensor run, shortening the O2 sensor lead, and building the fuel injector harness:













The fuel system is finally done (thanks Len) and Mr. Clewett is helping me avoid the land mines. They are two patient guys.

Thanks for following along...