Quote:
Thanks Rob! Great info!
What resistors did you get? Specs? ANy install instruction!
|
The Newark number for the resistors I got is 01F9895.
These are 1 ohm, 50 watt resistors and you'll need 2 of them. Each resistor needs to be wired inline with each injector trigger line going to the DME. These lines are the grey and grey w/ black stipe wires that go to pins 14 and 15 on the DME plug (at least on and 86 and 87 951). As for mounting, I just modeled my installation after the GURU RACING resistor package. You can see their setup
here, scroll about half way down the page.
Rob