|
Make your own lines
It's very easy. You can do cut them with a hacksaw if needed although I use and air compressor and cut off tool.
You can find some pictures and directions online. There is one trick though. For the first end you do, you can screw the nut onto the fitting.
For the second, in order to avoid twisting the line, screw the fitting into the nut. I.e. turn the fitting while holding the nut with a wrench. I usually stick a large diameter chisel through the banjo and I've never buggered one up. However, a piece of plastic is better.
You can buy a 3/8" piece from online metals.
Buy some hose and fittings. It will be cheaper and from now on you'll be able to do anything you want to do!
|