[jwetering]

Third day of wrenching - so far I estimate 6 hours spent, but that includes a lot of sitting around contemplating. Now that I've done this before I could *easily* do the work so far in 3 hours, and probably 2 hours or less the third time I tried it. Todays wrenching took two hours and the transmission is on the bench.

First things first the air box has to be disconnected. Loosen the two jubilee clamps and remove the two phillips head screws and the air tubes slide into the airbox. Also go ahead and remove the clamp that holds the breather tube to the airbox and disconnect it. The airbox is going to have to come out and the breather tube won't let it. No pic, but you can see it in the top right of the second shot there.