|
Registered
Join Date: Jun 2007
Location: Lake Oswego, OR
Posts: 6,225
|
Drill and tap a thread in the skull
Buy some hardwood dowelling around 3/4. Rockier has this in walnut at 36" for $8. Drill a hole for a stud that fits the skull. Cut to length. Epoxy stud to dowel. Sand taper into other end. Fit cane end on it. Screw skull onto stud. Use lock tight so it stays put. Sand dowel. Put stain if desired. Finish with gun stock oil. Total cost will be under $35 and it will be meaningful.
|