This engine came out of my race car it was leaking on the centerline of the cases because I had used the wrong sealer when I first built it. With E cams and 40 mm carbs made 125hp at the rear wheels and rev like crazy.
The engine would be best characterized as a long block. It does NOT have carbs, intake, fan, fan shroud, cams, timing chains, distributor and it is missing four rockers.
What it does have
Cases
The case is magnesium and are from a 2.2-2.4 engine
The oil bypass mod has been done, late pressure bypass pistons are installed
The cases do have functioning piston squirters
Bearings are included but need replacing
Cylinder studs have been upgraded (NOT ARP hardware)
Heads
2.0 late heads
Low hours on the heads, you could just bolt them on
The intakes have been ported to 38mm
Powder coated cam covers
Jugs
Biral cylinders
Pistons are 911S well used, knurled on the skirts to bring them back to size
Rings, need replacing
Crank
Non counterweighted, could use a polish
Oil pump
4 rib
Misc hardware
Engine tins
Case bolts
Timing chain sprockets
Hydraulic chain tensioners with stops
Behr oil cooler from a late engine
I would prefer new owner picks this up here in Marietta, Georgia but if shipping is necessary keep in mind it is to be paid by the new buyer and it won't be cheap, this stuff is heavy. I will work with the new owner on the shipping.
Here are some pictures
