Quote:
Originally Posted by Sicklyscott
Dumb question but have you verified the wires are on the correct cylinders?
|
The spark plug wires that connect to the spark plugs, will not reach any other destination.. Another words, number two spark plug wire will not reach number 3 cylinder and number one wont reach number two cylinder, same applies for 4,5,and 6.. Its virtually impossible, to cross wires that belong on each spark plug.
On the distributor side, I verified the firing order. Starting with number 1 cylinder which points at the small groove on distributor body, so my rotor then spins ccw... the next would be 6-2-4-3-5 in the firing order . That is all correct.
The vacuum hoses are all connected, there all in the center of the motor, none were in my way.. The only wire I disconnected was the wire that goes to my ac compressor.. I didn't even put the compressor back on the car.
Thanks, I appreciate the help...tomorrow is my last day at work, off for thanksgiving holiday, and I want to drive my car... I honestly feel like an idiot.. But, tend to see life as a learning experience.
Life is good.