all 6cyl and v8 fuel heads have the same mounting bolt pattern so can be swapped around at will
the following quoted post contains the only flow comparison data I've seen so might be helpful
Quote:
Originally Posted by Grupp-A
Here is a flow chart of Bosch CIS fuel distributors and all 911/930 distributors are listed. I guess the flow rate must be the factory setting from Bosch.
Cole:
Do you have the 037 model?
Do a flow test. Itīs very easy especially for you with your flexible fuel hoses and you donīt have to include the injectors, just put the hoses only in bottles, start your pumps and push the air flow meter down for 60 sec and then measure.
Fuel req. per injector:
6 cyl 300 bhp fuel req. 250cc +/- 10% = 225-275cc/min/cyl
6 cyl 350 bhp fuel req. 292cc +/- 10% = 263-321cc/min/cyl
Daniel |