|
Actually...... I take that back, and wished someone had corrected me.
The rear's are set up for a 10.6mm offset, but when there were cookie cutters or some PD's on it, they had spacers. The front is set up for a 23mm offset.
So, as long as you still have the cookie cutter rear spacers, you'll just need some 30mm spacers. If the rear spacers are removed, then you'll need 30mm front, and roughly 44mm in the rear.
I said 28mm all around earlier, bad math, but you would be fine most likely with +/- 4mm I'm sure.
You'll probably want to take those numbers to a mm to inch converter, as most of the spacers on eBay are sold by inches.
__________________
Jack
86 Red 951 - Turbo Twists, otherwise stock for now
83 Black 944 w/86 951 front end - still down and out, but coming back slowly.
02 Altima SE 3.5 - grocery go-getter
00 Yellow Ducati Monster 900i.e. 88 Chrysler Conquest TSi
|