Quote:
Originally Posted by Das944
Required:
Throttle position sensor (direct replacement for stock one)
Intake manifold pressure sensor (built into the ECU - you just run a vacuum line into the cabin, from the manifold)
Intake air temp sensor (i mounted mine on the air filter box lid)
(Wide-band) Oxygen sensor on the exhaust (direct replacement for stock one)
---2-wire Bosch Idle stabilizer valve...a 944S one will work, or the one off of 80s/90s Volvo cars.
|
see above
the PNP kit came with the ECU, IAT sensor, and some wiring to connect the TPS to the DME harness, and one to connect the IAT to the AFM plug.
you still need to buy your own Wideband sensor and wiring, but it plugs directly into the ECU.
if you had everything ready to go, you could do the install in an hour or so...