How To Get The Header bolts/Nuts Out?

[BMAN]

How do you guys get to the allen bolts to remove the headers. I see removing the nuts are not a big deal but the heater box block the allen bolts. So what's the trick in getting them out?

[930gt-40r]

if you have stock headers, a long 8 mm allen socket to go through the holes of the heater boxes.
No matter what you do they are going to suck at least a little, so be sure to hit them with a lot of PB blaster.

[BMAN]

Thanks for the reply... They are the stock headers. I'll have to look again but I don't remember seeing any holes to get to the allen bolts. I did spray them with WD-40.