Does anybody know where to find grill mesh for a RUF style front valance?
 

How about the front oil cooler system?
How involved is it to install a front coolre?
Thank you guys,
Miguel

Hi

I have seen people on this forum use either an old engine grill (the black one) cut to fit or maybe just go to the hardware store and buy some stainless mesh and make that fit.

You can do a search on this and the oil cooler issue. You will find plenty of info.

good luck

Jesper

I used an old engine grille and cut it to fit.

I used an old engine grill also.
Ben

Google "mesh grilles". I did and bought a nice grille for $20 for my front Setrab cooler.

Hi,
I used two sheets of aluminium diamond mesh, one behind the other in front of the oil cooler. Although it doesnt look it, the mesh is black but quite fine fom this angle, so most of the cooler tubes are showing. If you move up a little the mesh looks more pronounced.
http://i442.photobucket.com/albums/qq144/Jammo/A2.jpg
Hope it helps.
Regards

Jammo.;)