Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > 911 Engine Rebuilding Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered User
 
Join Date: Nov 2007
Location: Finland
Posts: 56
OEM vs Original valve springs etc

I will be building couple of early alu case 911 engines (66 and 67), one std and one significantly hotter. I tried searching without luck so what is general opinion of "OEM" parts vs original from Porsche for the following when used on std engine;

Valve springs
Valve stem seals

Are "OEM" ones OK to use or better spend bit more on original ones?
I know some prefer using old valve springs but IMO chances that new ones will last longer is better even if used ones are still within specs.
Of course this sort of list is endless (aftermarket vs original), thus I limited this to two.

Thanks!
Old 08-27-2018, 05:55 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Reply

Thread Tools
Rate This Thread
Rate This Thread:

 


All times are GMT -8. The time now is 03:03 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.