Rebuilding Zenith TIN
 

I have some old Zenith TIN carbs which were on a blown up 2,4 I bought years ago; been sitting in the garage for like 15 years. I am contemplating rebuilding them. Is there any way to pull them apart and tell if they are rebuildable?
TIA
Pat

Plenty of info here on Zenith carbs including some nice rebuild and upgrade video plus links to download the factory diagrams and info. There is a good aftermarket supply of parts via a seller on eBay as well as a few specialty Porsche vendors and our host. They are fairly easy to tear down and rebuild too. Some of the rebuild kits contain some gaskets and o-rings that I was not happy with the fit of. In the end I sourced the individual components and was much happier with the results YMMV.