|
|
|
|
| Author |
|
|
Stranger on the Internet
Join Date: Apr 2004
Location: Bradenton, FL
Posts: 3,244
|
Rebuilding Zenith TIN
I have some old Zenith TIN carbs which were on a blown up 2,4 I bought years ago; been sitting in the garage for like 15 years. I am contemplating rebuilding them. Is there any way to pull them apart and tell if they are rebuildable?
TIA Pat
__________________
Patrick E. Keefe 78 SC |
||
06-01-2019, 06:03 PM
|
|
|
Registered
|
Plenty of info here on Zenith carbs including some nice rebuild and upgrade video plus links to download the factory diagrams and info. There is a good aftermarket supply of parts via a seller on eBay as well as a few specialty Porsche vendors and our host. They are fairly easy to tear down and rebuild too. Some of the rebuild kits contain some gaskets and o-rings that I was not happy with the fit of. In the end I sourced the individual components and was much happier with the results YMMV.
__________________
Brian Miller - Scottsdale, AZ 1971 Porsche 911 T Targa @targatuesday :: 2005 Ducati Monster S2R :: 2008 Porsche Cayman S |
||
|
06-01-2019, 09:07 PM
|
|
1974 Porsche 914 2270 Type IV
