Abandoning MY 3.5 Engine build - Interest?

[930rsr]

I am a 28 year PCA member. I was planning on building a 3.5 killer motor, but time got in my way. Lots of Parts are NOS. Here are some of the parts I have.

NOS 3.5L (100mm), 10.3 to one Mahle P/C’s. New Clewett 50 mm PMO’s , with terminated wiring (plug and play). TEC-3r ECU, 6 Cyl DFU, with power harness and coil mounting platform on the engine. Also Clewett dual plug wires. Balanced Intermediate shaft and polished crank (std/std) with new Clevite bearing by Armondo At CCR. New 20/21 Web Cams. New Pauter rods. Twin Plugged heads from Dave at MSRoad Race, a pair of 3.2 cam towers and a 3.2L engine case, from Tom’s Rennshop. NOS TRW intake and Exhaust valves. Other parts like pressure tested engine oil cooler and 3.2L oil pump available. Looking to sell in “bulk”. I will post on Pelican Classified if I don’t get bulk buyers.

[mepstein]

What’s your bulk price.

[Turbo_pro]

Lots of nice pieces .
What is the price. You can email me if you want.

email sent.

[930rsr]

Sorry if I didn't make it clear. I am not asking any one person to buy everything. I would like to sell these items off in nice palatable units. Example: Clewetts ITB's, plug wires and piston and cylinders, and the dual plug heads as a unit. All of the NOS items like Pauter rods, Clewett ITB's plug wires, Web Cams are all in unopened boxes. I expected people to want a bundle and I would give them a good price, for their unique bundle. I can and will give a all in package price. Give me a day. BTW, if it within a 300 mile radius of me, I can deliver. I will post some pictures tomorrow. I have pictures but need to take current pics. Plus most of them are JFIF which will not load. Since so many people are asking about the "package", I will create a package deal.

[930rsr]

Sent you a PM. I also include some converted pics JFIF to JPG. I will take my time tomorrow and create a detail, comprehensive price list.

[Henry Schmidt]

Of course, this could leave a few dollars on the table but I think it's pretty close.

NOS 3.5L (100mm), 10.3 to one Mahle P/C’s. $ 3,500
New Clewett 50 mm PMO’s , with terminated wiring (plug and play). $ 3,000
TEC-3r ECU, 6 Cyl DFU, with power harness and coil mounting platform on the engine. $ 3,500
Balanced Intermediate shaft and polished crank (std/std) $ 2,000
Clevite bearing $ 300
New 20/21 Web Cams. $ 1,200
New Pauter rods. $1,800
Twin Plugged heads from Dave at MS Road Race, NOS TRW intake and Exhaust valves $ 3,500
2) 3.2 cam towers $ 700
3.2L engine case $ 3,200
pressure tested engine oil cooler $ 500
3.2L oil pump $ 400
Clewett dual plug wires. $ 350
Total $ 24,000

[930rsr]

Here are picture of the parts. Henry, thank for the research. You are definitely in the ballpark. Thanks for the numbers. You are in the ballpark. I question three items that I will reach out to you on later tonight. Thanks again for your input. I will send a picture of the piston next. I could on attach 10 pictures.

[Henry Schmidt]

Originally Posted by 930rsr

Here are picture of the parts. Henry, thank for the research. You are definitely in the ballpark. Thanks for the numbers. You are in the ballpark. I question three items that I will reach out to you on later tonight. Thanks again for your input.

Hi Sam
No research, just off the top of my head. I deal with this stuff every day.
The prices were simply my estimate of the parts as an engine builder.
A friend asked me to look at the list and make a fair assessment. These numbers are a pretty fair assessment.
These prices represent the kind of pricing I would use to sell parts I have in house or have sold recently.
As my post states "Of course, this could leave a few dollars on the table but I think it's pretty close."
Right now we are building a number of 3.6/3.8 projects (5 or 6) and a couple represent engine kits purchased from Autobahn in So. Cal ((619) 444-3229) and one such kit included a new 3.6. That kit costs him just under $13K special deal of course.
but he has similarly priced kits.
My prices are not an offer. My offer would be much less.

Cheers

[930rsr]

I want to thank everyone that has PM'd me with interest on the parts individually. I have kept you emails, and you are first in line for individual parts. I will post prices for all the parts with a total. I'd like to sell all the parts to one buyer, but if I can sell in bundles, that would be nice too. I am trying to avoid 10 or 15 one off transactions. I am posting on this forum because these parts are targeting builders, not resellers. Thanks in advance, Sam.

[930rsr]

I would like to sell all the parts to one buyer if possible. However, if not, I will sell to the next buyers who buys more than one item. I am attempting to minimize the number of transactions. If some one buys everything, I will consider delivering all parts to you. Not only does it save on shipping, I don't have to unpack the boxes from MS RoadRace and Clewett. If my math is correct, the total for the parts listed below is $24,850. I believe that is about a 15 to 25 percent discount of most of the items. If one person buys everything I will drop the price to $22k even (another 10% approximately). Here are the prices: PM me if you want to bundle specific items. I will wait two days to see if I get a all-in buyer. If not I will look at the who has bundled the most items together. After that, I will look at the individuals who have already PM'd me about specific items. Specific items are on a first come, first serve basis. Thanks for your patience, Sam.

01. Clewett 50mm ITB Kit NOS with terminated ends dual plugs, TEC-3r, 6 cyl DFU, power harness and Clewett dual plug wire (invoice is attached $9,127.95). Price - $7,100.

02. Mahle 3.5 Liter Pistons and Cylinders (NOS), NLA 911-103-100-23. The compression ration is 10.3 to 1. Price - $5000

03. Pauter Rods New in box for a 3.2 crank. Price - $1600

04. Crankshaft polished, drilled plugs, etc. STD/STD, Intermediate shaft balanced, new gears, work done by Armondo at CRC. Clevite Bearings include. Price - $3000

05. Twin Plugged Heads (6) from Dave at MS Roadrace, with NOS TRW intake and exhaust valves. Price - $2750

06. Two 3.2 Liter Cam Towers - Price - $600

07. Oil pump 3.2L Price - $500

08. Oil Cooler cleaned and pressure tested - Price - $600

09. Engine Case 3.2 Liters - Price - $2750

10. Web Cam 20/21 Profile New in box Price - $950

[john walker's workshop]

Case, as PM'd.