Looking for a part source for CIS Injection Lines

[rich]

I have a 73 2.7S with CIS. I am looking for a souce for the injector line tubing. I see there is complete lines with fitting available but I just want the line material.

[Saadi996tt]

Reach out to Len (BoxterGt)he can make any of the lines you require. Buy with confidence, he’s very knowledgeable and a stand up guy.

Len Cummings
len.cummings@verizon.net

Thanks,
Saadi


Sent from my iPhone using Tapatalk

[47silver]

I second the reference to len. He knows what you need

[boyt911sc]

Originally Posted by rich

I have a 73 2.7S with CIS. I am looking for a souce for the injector line tubing. I see there is complete lines with fitting available but I just want the line material.

Rich,

Unless you have experience fabricating fuel injection lines, I strongly recommend getting them from the professional builders. These are not like the rubber fuel lines you use in a carbureted system that has 5 psi. system pressure. A typical CIS like yours has 70~75 psi. system pressure and could get as high as 100 psi. when the fuel flow get restricted.

Tony

[rich]

Thanks guys.

[BoxsterGT]

Here is what I offer in case you want to buy complete assemblies....





len.cummings @ verizon.net