![]() |
|
|
|
Registered
Join Date: Sep 2003
Posts: 7
|
2.4 Mfi ??
With a 2.4mfi engine, what is required to make this engine able to run 'outside' a 911. Basically, I am looking to put this motor with a 901 trans in my VW Ghia. I need to know if there are any electronic or other items I will need that wouldn't be on the motor that the MFI would require to operate.
Thanks!! |
||
![]() |
|
Registered
Join Date: Jan 2002
Location: West Lafayette Indiana
Posts: 1,421
|
Just the appropriate fuel pump to supply the injection pump and the fuel filter can, space for an oil tank, and maybe an electrical panel. Oh, and you'll need to come up with some reasonable rear motor mounts. Some others may chime in, this is just the immediate issues I see. It could be done, and fairly easily by some one who is mechanically inclined, If thats not you, it ain't a great idea.
![]() Would be a fun Ghia though
__________________
Dennis H. 72 911E 2.7 RS stuff 72 911T with a 2.7(Sold 5-13-2011) 2012 Kona Blue Metallic Mustang GT Convertible 6spd 67 Mustang coupe future SVRA group 6 car 63 Falcon hardtop 302/4spd |
||
![]() |
|
Registered
Join Date: Mar 2001
Location: Marysville Wa.
Posts: 22,427
|
consider replacing the rear torsion bar housing with a 911 unit. then everything, suspension, trans, axles, and engine, bolt right up. a rear mount for the engine is needed of course. an oil tank should fit in the right rear fender area.
__________________
https://www.instagram.com/johnwalker8704 8009 103rd pl ne Marysville Wa 98270 206 637 4071 |
||
![]() |
|
Registered
|
the MFI engines are very self contained but I think the other thing would be the CDI box for ignition but that should be very simple to mount (4 wires and can be mounted just about anywhere)
__________________
Tim 1973 911T 2005 VW GTI "Dave, hit the brakes, but don't look like your htting the brakes...what? I DON'T KNOW, BRAKE CASUAL!!!" dtw's thoughts after nearly rear ending a SHP officer |
||
![]() |
|