|
|
|
|
| Author |
|
|
Registered
|
New rebuild is running fine! Thanks to all
It's been a long 9 months. Took longer than I thought, but that's normal.
Thanks to Wayne's book (without which I would not have had the courage to start), this web site, lots of parts, hard work and patience, it's finally done. Thanks to all of you who helped me. John Walker did a beautiful job on my heads. No oil leaks, no smoke, great oil pressure...whew!!! Thanks again. Norm 
__________________
Norm '86 930 AEM Infinity 6 - Twin Plug 3.6L - DBW - JE Pistons/LN Eng. Cylinders - Pauter rods - GT3 Crank - GTX3584RS - ID1050x Injectors - Ported Intakes - Custom Intake Manifold, exhaust and intercooler - 993SS cams - ECUMASTER PMU-16DL HRE Wheels 560R 8.5x18 ET25 (Front) 11x18 ET0 (Rear) Last edited by nreed; 08-12-2004 at 07:06 AM.. |
||
08-12-2004, 07:04 AM
|
|
|
Registered
Join Date: Jan 2004
Location: Richmond,Va
Posts: 916
|
first rebuild? Specs?
Thanks, Harold
__________________
Harold 
|
||
|
08-12-2004, 07:10 AM
|
|
|
Registered
|
Yes, my first rebuild.
Specs: Modified 86 930 DTA Fast P8Pro ECU Carrera Manifold Ported 930 heads Elgin SC330 cams K27 HighFlow Turbo Tial Wastegate 55# Siemens Injectors GHL dual 4" Kokeln intercooler (modified)
__________________
Norm '86 930 AEM Infinity 6 - Twin Plug 3.6L - DBW - JE Pistons/LN Eng. Cylinders - Pauter rods - GT3 Crank - GTX3584RS - ID1050x Injectors - Ported Intakes - Custom Intake Manifold, exhaust and intercooler - 993SS cams - ECUMASTER PMU-16DL HRE Wheels 560R 8.5x18 ET25 (Front) 11x18 ET0 (Rear) |
||
|
08-12-2004, 07:47 AM
|
|
|
Registered
Join Date: Apr 2002
Location: Cheraw, SC
Posts: 811
|
Norm, sounds like you and me are on the same track.
Its good for me to hear that your rebuild went well. I'm hoping to fire mine up next week. Send me an email Norm, I want to ask you a question about throttle linkage. briankeithsmith@ctc.net Brian
__________________
Brian Keith Smith |
||
|
08-12-2004, 07:54 AM
|
|
1986 Porsche 930
