|
|
|
|
| Author |
|
|
Registered
Join Date: May 2004
Location: Ontario Canada
Posts: 53
|
cam timing spec euro t
Hi. I'm in the process of timing my cams and and am wondering if the intake overlap spec in Wayne's book for a 72 t model 911/51/61 a value of 2.4 to 2.8 mm would also apply for a euro 911/57 (carbs) as I don't see a listing for mine. If I need a different value does anybody have it? It's not listed in B.A's book or the Haynes manual either.
Any answers or help is greatly appreciated. Thanks, Clarence
__________________
72 911T Euro 81 931 71 911E Euro rusty on the bottom 72 911T project RS look |
||
02-02-2005, 06:00 PM
|
|
|
Registered
Join Date: Feb 2001
Location: Viera FL
Posts: 5,642
|
Hi.
After looking through the workshop manual, the spec books, and PET, the best value I can find for that engine is 2.4mm - 2.8mm. Optimum value is 2.6. AFJuvat
__________________
Es geht nicht darum wie schnell man faehrt, sondern wie gut man schnell fahren kann. Ihr Brunnen der nutzlosen Porsche Information |
||
|
02-02-2005, 08:08 PM
|
|
|
Registered
Join Date: May 2004
Location: Ontario Canada
Posts: 53
|
Thanks AF, that's what I went with. Thanks for looking it up.
Clarence
__________________
72 911T Euro 81 931 71 911E Euro rusty on the bottom 72 911T project RS look |
||
|
02-03-2005, 06:26 PM
|
|
