AFJuvat

Is Soloqqq a spam bot?

I misposted 996 Oil Leak. I tried to remove it or change title but couldn't.

My apologies!

"You may have a bad electrical contact in your gauge. You can clean it up and get it working again.

I wrote a tech article on this, it hasn't been published yet but if you want a copy I can send it to you

AFJuvat"

Can you send me a copy please! My email is friendlyguy64@hotmail.com

I ended up buying a new sending unit, but I got nothing.

Hi,

Relatively new member here. I have made several posts and started a few.

But, I have started 2 different threads (after logging in and such) within the past couple days, as recently as 5 min ago "Do I have a K-40?" and when I do I get a message that my posts will be reviewed and posted by a moderator.

Is there some reason for this? Software glitch? Forum infraction (I cannot imagine)?

TIA

Cheers!

my bad sunroof procedures.

hey do you have the reset procedures i have a 01 996 my email is sixtytwograms@yahoo.com thanks.

Hello AFJuvat,

I have read several posts about 964 top issues and your name rises to the top as a SME. I need some help with a 91 964 that has been giving us fits. Here's the background:

Car was driven in parade and several people sat on the top(no boot) and possibly got the top out of whack which resulted in the breakage of the right top bow. Top was operated in this state and both cables eventually stripped. Here's what has been done so far to attempt to fix:

Both motors in header replaced.
Every microswitch checked and found to be in spec.
Every wire to every component checked OK.

TDC switch will not stop top from moving forward when it touches the header. To closetop, one must reverse switch at that point to get it to close. Any ideas would be appreciated!

hello
when i hit teh search button and type in an item, i get a message that says my token has expired. what the heck does that mean? why can't i search for anything anymore?
thank you
todd witte
york, pa

The forbidden topic sticky on the 930 board has just been spammed.

Good Evening