|
|
|
|
| Author |
|
|
Alright....
|
Zenith Carb Question
What size jets would I need to install on a Zenith carb that was setup for a 2.4 t but will be installed on a 2.7? Also, would the ventuires need to be changed?
The 2.7 is currently running CIS and no other mods will be done to the engine at this time. (I know carb cams, Ps&Cs, and perhaps different heads would help, but baby steps first  )Side note: I know Webers and PMO's are the carb of choice, my budget does not allow for top of the line. 
__________________
Stephen Friendswood, Texas '78 Targa w/ '86 930/20 w/ '74 915/06 |
||
12-02-2005, 01:28 PM
|
|
|
Registered
|
A neighbor of mine took the Weber 40's from his 2.2E and put them directly on the Henry Schmidt built 2.7 (e-cams) which he put in the car. I suggested some jetting changes to free up the top end HP some, but my neighbor figured he'd just leave it as is for now. To be to be honest the car runs great as is.
__________________
John '69 911E "It's a poor craftsman who blames their tools" -- Unknown "Any suspension -- no matter how poorly designed -- can be made to work reasonably well if you just stop it from moving." -- Colin Chapman |
||
|
12-02-2005, 04:03 PM
|
|
1969 Porsche 911E 2.0 E
