Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > 911 Engine Rebuilding Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered User
 
Join Date: Aug 2005
Posts: 34
SSI Heat Exchanger Install Help

I am attempting to install SSI heat exchangers on a 1983 911 motor. Attached is a pic of my old exhaust system with a crossover pipe on the inside of the exchangers in which the extension when up into the engine compartment and attached to the CIS blower. Does anyone know how to install the SSI's as the my old crossover pipe will not work. I cannot find any info or pictures on how this would work?

Thanks
Mike
1974 911s coupe



Old 01-28-2006, 10:15 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered User
 
john walker's workshop's Avatar
 
Join Date: Mar 2001
Location: Marysville Wa.
Posts: 17,469
if you want to run the blower, keep the stock SC rear sheetmetal and use a short flex hose, like the red one that goes from exchanger to heat valve on the body, and join the SSI outlet to the tube that's in the SC tin. then everything on the left side remains the same up top. that crossover in the pic is a 84-89, so it won't work. the oil line goes too, you need the under bellhousing one.
__________________
8009 103rd pl ne Marysville Wa 98270
206 637 4071
Old 01-28-2006, 10:31 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Registered User
 
Join Date: Aug 2005
Posts: 34
Thanks for the info. What about the right side. What do I attach that to? As I do not use the heat or air do I need to attach any of this back as it was?
Old 01-28-2006, 10:37 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Reply

Thread Tools
Rate This Thread
Rate This Thread:

 


All times are GMT -8. The time now is 08:19 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.