machine shop referral
 

Could someone give me a referral for a machine shop in, or south of the Bay area. We don't have a capable shop here in Hawaii, and I will be traveling to the San Fransisco Bay area in a couple of weeks. Thank you!

German Precision, Ted Robinson is in Sunnyvale.
http://www.germanprecisioninc.com/

Thank you John! By the way. Could you point me in the direction of what might have caused the cam problem? If it is repaired, will I also need to re-hab or replace the rockers? Thank you!
Jon

Looks like the either the lobe or the rocker arm wasnt flat.
Its a good idea to use new or rebuilt rocker arms any time
a new or repaired cam is installed.

Thanks John. Well, now that it is all dissassembled, I wish the cam was the worst news, but it's not . Pistons and cylinders are beyond limits. I'm going to have a beer and contemplate the meaning of life. . ....

Post a wanted ad in the classified section. Im sure someone has some good used 2.0 pistons and barrels.

Ted is defineitely the man! I would trust him till the cows come home. ;)
If you need some spare rockers...I have some.

BTW, Be prepeared to get in the conga line to get your stuff done. If you want the best....get in line!

I spoke with Ted earlier today. Very nice! I explained that I would be traveling from Hawaii. His turn-around time was reasonable.
As far as p&c's, now I'm contemplating the 2.2, or 2.4 option, but with every thought I hear that nagging sound...ca-chig. Why replace cams with stock ones?, since I need p&c's, why not go bigger?, and on and on.....but in the end, it is after all, a 66'. and I think that I should just do the very best with the 2.0--- but it's soooo tempting. Aloha, Jon

We have a new set of Mahle Ps&cs that I would sell for a very reasonable price.
call or email.
760-728-3062
supertec1@earthlink.net