|
|
|
|
| Author |
|
|
Registered
Join Date: Feb 2006
Location: Oahu
Posts: 2,303
|
machine shop referral
Could someone give me a referral for a machine shop in, or south of the Bay area. We don't have a capable shop here in Hawaii, and I will be traveling to the San Fransisco Bay area in a couple of weeks. Thank you!
__________________
Jon |
||
03-11-2006, 07:31 AM
|
|
|
Registered
Join Date: Feb 2004
Location: California
Posts: 926
|
German Precision, Ted Robinson is in Sunnyvale.
http://www.germanprecisioninc.com/
__________________
John Dougherty Dougherty Racing Cams |
||
|
03-11-2006, 08:51 AM
|
|
|
Registered
Join Date: Feb 2006
Location: Oahu
Posts: 2,303
|
Thank you John! By the way. Could you point me in the direction of what might have caused the cam problem? If it is repaired, will I also need to re-hab or replace the rockers? Thank you!
Jon
__________________
Jon |
||
|
03-11-2006, 09:07 AM
|
|
|
Registered
Join Date: Feb 2004
Location: California
Posts: 926
|
Looks like the either the lobe or the rocker arm wasnt flat.
Its a good idea to use new or rebuilt rocker arms any time a new or repaired cam is installed.
__________________
John Dougherty Dougherty Racing Cams |
||
|
03-11-2006, 09:32 AM
|
|
|
Registered
Join Date: Feb 2006
Location: Oahu
Posts: 2,303
|
Thanks John. Well, now that it is all dissassembled, I wish the cam was the worst news, but it's not . Pistons and cylinders are beyond limits. I'm going to have a beer and contemplate the meaning of life. . ....
__________________
Jon |
||
|
03-11-2006, 03:34 PM
|
|
|
Registered
Join Date: Feb 2004
Location: California
Posts: 926
|
Post a wanted ad in the classified section. Im sure someone has some good used 2.0 pistons and barrels.
__________________
John Dougherty Dougherty Racing Cams |
||
|
03-11-2006, 05:37 PM
|
|
|
Registered
Join Date: Jul 2005
Location: San Jose
Posts: 4,622
|
Ted is defineitely the man! I would trust him till the cows come home.
 If you need some spare rockers...I have some. BTW, Be prepeared to get in the conga line to get your stuff done. If you want the best....get in line!
__________________
Dan 2002 996 C4 Cab w/ Jake Raby 4.0 2024 Tacoma TRD Offroad 4x4 2003 Range Rover HSE |
||
|
03-11-2006, 08:34 PM
|
|
|
Registered
Join Date: Feb 2006
Location: Oahu
Posts: 2,303
|
I spoke with Ted earlier today. Very nice! I explained that I would be traveling from Hawaii. His turn-around time was reasonable.
As far as p&c's, now I'm contemplating the 2.2, or 2.4 option, but with every thought I hear that nagging sound...ca-chig. Why replace cams with stock ones?, since I need p&c's, why not go bigger?, and on and on.....but in the end, it is after all, a 66'. and I think that I should just do the very best with the 2.0--- but it's soooo tempting. Aloha, Jon
__________________
Jon |
||
|
03-11-2006, 10:13 PM
|
|
|
Try not, Do or Do not
|
We have a new set of Mahle Ps&cs that I would sell for a very reasonable price.
call or email. 760-728-3062 supertec1@earthlink.net
__________________
Henry Schmidt SUPERTEC PERFORMANCE Ph: 760-728-3062 Email: supertec1@earthlink.net |
||
|
03-12-2006, 04:52 AM
|
|
Porsche
Retor 911
Scarab
Riley
