|
|
|
|
| Author |
|
|
Registered
Join Date: Feb 2005
Location: LA
Posts: 1,183
|
chain guide slipper removal
On my 2.4L engine I cannot seem to remove the Right hand side cam chain cover due to the Chain Slider obstructing the chain from being removed.... how does the Chain slider disconnect from the housing?
__________________
71 Targa 2.4 WEBERS 915 box Drivetrain - http://forums.pelicanparts.com/porsche-911-technical-forum/410787-drivetrain-project-complete-3yrs-pics.html Interior - http://forums.pelicanparts.com/porsche-911-technical-forum/452686-interior-refurb-carbon-fiber-71-a.html#post4433500 |
||
03-31-2006, 06:52 AM
|
|
|
Registered
Join Date: May 2000
Location: Los Alamos, NM, USA
Posts: 6,044
|
If chain slider/slipper means the plastic chain ramps they are best removed with a slide hammer with a hook plate tip that pulls against the back of the chain ramp. One can also pry them off if one takes care that the prybar and it's fulcrum do not mar what they are reacting against. Removing chain ramps almost always breaks the retaining clips so plan on replacing any chain ramp you remove.
|
||
|
03-31-2006, 09:57 AM
|
|
|
Registered
Join Date: Feb 2005
Location: LA
Posts: 1,183
|
Thanks for the post.. thats eXactly what I needed to know.. They should just pull off.....
__________________
71 Targa 2.4 WEBERS 915 box Drivetrain - http://forums.pelicanparts.com/showthread.php?t=410787 Interior - http://forums.pelicanparts.com/showthread.php?p=4433500#post4433500 |
||
|
03-31-2006, 10:56 AM
|
|
|
Registered
Join Date: Feb 2006
Location: Oahu
Posts: 2,303
|
Mine had a small wire lock underneath. It grabs the bolts. With a small pick, I depressed the spring wire, and they slid right off.
__________________
Jon |
||
|
03-31-2006, 01:08 PM
|
|
